Line Shut-off Valve

Line Shut-off Valves are cleaned for medical gas use and 100% hydrostatic
tested, these 3 piece medical gas valves are designed to meet the
NFPA 99c, ISO 7396-2 & G-01 standards

Downloads:

Spec Sheets
  • Valve shall be 3 piece ball-type full bore design, with a bronze/ brass
    body, stainless steel ball, stem, bolts & nuts.
  • Seat shall be Teflon (RPTFE) and seal Viton.
  • Valves 1/2” to 2” shall have a minimum pressure rating of 4137 kpa
    (600 psi) wog. Valves 3” to 4” shall have a minimum pressure rating
    of 2758 kpa (400 psi) wog.
  • Valve shall require only a quarter turn from a fully open position to a
    fully closed position.
  • Extensions stubs shall be K type with a minimum of 150 mm long
    to allow brazing     without damaging the valve seat
    and seals due to heat transfer
  • Each valve shall be hydrostatically tested for leakages.
  • Each valve shall be washed and degreased for medical gas use.
  • Pipe stub extensions shall be capped at both ends.
  • The valves shall be supplied in sealed plastic bags, marked with “Oxygen”
    or “cleaned for oxygen use”, to prevent contamination before installation.
  • Valves shall be Silbermann model SP150 or equivalent.
  • All valves shall comply with NFPA 99, ISO 7396-1 & G-01 standards.
Related products